A.M.P.I. - Master-8 IS THE BEST STIMULATOR IN THE MARKET!!!

Master-8 Is The Best Stimulator On The Market

If you are considering buying a new stimulator, you should know that Master-8 is the best simulator on the market!

Example 1: DID YOU KNOW THAT MOST STIMULATORS CANNOT HANDLE THE FOLLOWING SIMPLE EXPERIMENT?

Master-8 DOES IT EASILY !

THEY CANNOT HANDLE THIS, BECAUSE:

MASTER-8 DOES IT EASILY, AS:

They require 6 channels for this pattern (one to trigger the scope, another to trigger the calibrator, and 2 channels for each of the twin pulses even in the TRAIN mode), but they don't have 6 channels. Master-8 has 8 channels.

They cannot repeat the sequence every 2 minutes because their longest interval is shorter than 2 minutes! Master-8 allows interval, duration or delay time up to 3,999 s. (more than an hour).

They cannot provide a 10.12 ms. interval as they have 3 digits resolution only. Master-8 provides 4 digits resolution.

Example 2: DID YOU KNOW THAT WITH MOST STIMULATORS IT IS EXTREMELY DIFFICULT to modify the time parameters when switching from one range to another. How would you do it while running your experiment?
e.g. while running any channel in the FREE-RUN mode, switch its interval time from 10.1 ms. (most stimulators cannot provide 10.12 ms.) to 9.97 ms.

If you make the above changes while you are stimulating, you get intermediate undesired parameters!

Master-8 DOES IT EASILY - in 2 ways:

1) Use the keys, OR
2) Enter the new parameter via the front panel keys.

The new value becomes operative at once, the instant you press the ENTER key, thus you don't get undesired parameters.

Example 3: DID YOU KNOW THAT MOST STIMULATORS HAVE ONLY ONE SINGLE manual (external) trigger input? Thus, you cannot manually (externally) trigger several channels independently.

Master-8 DOES IT EASILY - You can manually trigger each of the 8 channels independently, and you have 2 independent external trigger sources.

and... Master-8 DOES MUCH MORE:

Master-8 is simple to operate and user friendly.
You can easily switch between 8 preprogrammed experiments using a single command.
Master-8 includes an RS-232 interface to communicate with your P.C. (bidirectional).
The channels can operate independent of each other, not only in sequence.
Each channel can be triggered from many channels at the same time.
With Master-8-vp you get digital amplitude. You can set the amplitude using the front panel keys or via your PC.
With Master-8-vp you can get increment and decrement voltage steps.

Back to A.M.P.I. equipment main page

THEY CANNOT HANDLE THIS, BECAUSE:	MASTER-8 DOES IT EASILY, AS:
They require 6 channels for this pattern (one to trigger the scope, another to trigger the calibrator, and 2 channels for each of the twin pulses even in the TRAIN mode), but they don't have 6 channels.	Master-8 has 8 channels.
They cannot repeat the sequence every 2 minutes because their longest interval is shorter than 2 minutes!	Master-8 allows interval, duration or delay time up to 3,999 s. (more than an hour).
They cannot provide a 10.12 ms. interval as they have 3 digits resolution only.	Master-8 provides 4 digits resolution.